Welcome Guest, Not a member yet? Register   Sign In
Stainless Steel Sink Manufacturers Share How To Increase Kitchen Space
#1

[font=微软雅黑]Stainless Steel Laundry Cabinet[/font] manufacturers share solutions for faucet leakage
1. The faucet still produces water after the valve core is closed
In this case, it may be due to the loosening of the pressure cap or the deformation of the rubber ring at the bottom of the valve core. For the former, it is recommended to remove the handle and decorative cover and tighten the pressure cap again. In the latter case, it is recommended to remove the valve core. Check the condition of the aprons before reinstalling.

2. Water seeps out around the spool
If this phenomenon is encountered, the spool may be loose or deviated. It is recommended to remove the spool and install it again.

3. Water seeps from the middle of the valve core
If the above phenomenon is encountered, the spool is damaged. At this time, it is recommended to replace the spool.

4. Water leakage at the bottom of the faucet
Encountered this phenomenon may be caused by the inlet pipe O-ring is not installed or deformed. It is recommended to unscrew the hose to see if the O-ring is loose. If it is loose, reinstall it. If it is found that the O-ring has been deformed, it is recommended to replace the O-ring.

information about Stainless Steel Laundry Cabinet : [font=宋体]https://www.afastainlesskb.com/product/[/font]
Reply




Users browsing this thread:
1 Guest(s)


Theme © iAndrew 2016 - Forum software by © MyBB