Welcome Guest, Not a member yet? Register   Sign In
Lavatory Cabinet Manufacturers Share The Role Of Niches
#1

Lavatory Cabinet manufacturers share that many home decoration will now consider designing niches in the bathroom, especially on the walls inside the shower area, using the space of the wall to install an alcove for storing toiletries, without worrying about bearing weight at all And water stains. So many people will ask, what is an alcove? In fact, in the colloquial terms, the alcove is actually a storage area created by recessing the wall into part of the space. It does not occupy its own space area, but can also have some more storage space design. And this design is easy to implement for the bathroom itself with many irregular structures.
In addition to using the original wall to create alcoves, you can also use the wasted space of the wall. Although it is particularly narrow, it can also be used, becoming an important part of the bathroom storage.
At present, the most widely used niche design is the space behind the toilet, because many toilets installed in home toilets are hidden water tanks, that is, built into the wall, the space above the bathroom water tank can be fully utilized, creating The alcove is used for storage.
There are quite a lot of such spaces in the bathroom. For example, the wall on the side of the bathtub can also be taken out for storage and pasted with uniform tiles, you will think it is naturally formed. The shower area is also used to create the area with the most niches. After all, the dry area can also be stored with wooden cabinets, and the shower area uses water very frequently, which is even more urgent for the needs of the niches.
Even if the structure of the bathroom itself is flat enough to find the location of the niche, there are still three ways to create the niche. The first is the location of the water pipe. If the water pipe is included, there must be gaps. It is convenient to come out of the niches in this way. The second is to make a slot in the wall. In general, it is to make a hole in the wall. There is always a wall that is a non-load-bearing wall and can be used. The depth of the niche is only 15-20 cm. The third and final point is to be good at finding gaps, using the gaps to make alcoves, such as the edge of the toilet and bathroom cabinets, the edge of the shower partition, etc., surely you can still find a space that can hold a partition, this partition It’s ok to change to marble, have you learned it?
The above information is compiled and shared by Stainless Steel Faucets Manufacturers, hoping to help those in need.
Reply




Users browsing this thread:
1 Guest(s)


Theme © iAndrew 2016 - Forum software by © MyBB