Welcome Guest, Not a member yet? Register   Sign In
Handmade Sink Manufacturers Share The Benefits Of Handmade Sinks
#1

Any sink in life has advantages and disadvantages, of course, manual sink is no exception, so AFA [font=宋体]Handmade Sink Manufacturers[/font] let's take a look at its characteristics.

The manual sink is made by bending and welding with 304 stainless steel plate. The difference from the ordinary sink is that there are many places to be welded.

The thickness of the manual sink is generally relatively thick, generally around 1.3mm-1.5mm. This thickness is easy to weld and the thickness is uniform, and the phenomenon that the sink is not too thin will not occur. It is impossible for the stretching water tank to reach this thickness, because the larger the thickness, the greater the punching pressure required. If it is 1.2mm, a 500-ton punching machine will not help. So from the material point of view, the manual sink will definitely be more wear-resistant.

From the appearance, the handmade sink is straight up and down, with edges and corners, and has a stronger texture. At present, the surface treatment of the manual sink also has pearl sand or brushed sink. Do not worry about its beauty. However, such straight-up edges also caused us some trouble in cleaning up the residue in the future. Especially the 90 ° corner is the hardest to clean. Due to the rounded corners of most of the edges of the integrated stretch sink, it is far-fetched to make an under-counter basin, but a manual sink can easily be an under-counter basin to avoid water seepage from the countertop.


information about Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/s...made-sink/

Attached Files Thumbnail(s)
   
Reply




Users browsing this thread:
1 Guest(s)


Theme © iAndrew 2016 - Forum software by © MyBB